The housing of CPW-180HS is made of durable stainless steel. The driving module of the mechanism adopts top brand industrial-grade DC servo motor and servo vector control technology, so as to make sure the swing gate can move quickly and accurately, stably and quietly, with low-power consumption, energy conservation and environment protection.
² By using 8 pairs of military level high-performance infrared sensors and exact algorithms, it can accurately detect the pedestrian’s passing position to achieve the purposes such as anti-tailgating, anti-reverse passing, anti-clamping and so on.
² The wider lane is optional for carrying luggage and wheelchair access.
Structure Chart
|
Housing material |
|
|
Surface treatment |
Brushed finish |
|
Swing gate material |
Organic glass |
|
Technical Parameters |
|
|
Normal passing speed |
30 ~ 45 people/min（depending on the condition of pedestrians） |
|
Evacuating speed |
60 people/min（depending on the condition of pedestrians） |
|
Opening speed |
0.4-0.8s |
|
Turning angle |
±90° |
|
Operating temperature |
﹣20℃~60℃ |
|
Electric Parameters |
|
|
Power supply |
100-240VAC，50/60Hz |
|
Rated power |
150W |
|
Control input/output |
12 channels relay control output / 8 channels dry signal input |
|
Communication interface |
RS485 / RS232；TCP/IP interface（customizable） |
|
Driving motor |
Industrial DC brushless servo motor |
|
Motor control mode |
Servo vector control |
l Basic Functions
Ø Passing mode switching function：Both the entry and the exit can be set to be【controlled mode】 /【 free mode 】/【 forbidden mode】independently.
Ø Automatic reset function: The turnstile will open the gate after receiving a valid opening signal when standby. The swing gate will return to the hindering zero position automatically under the following situation:
（1）Within the allowed time, pedestrians have been detected to pass through the passageway in specified direction;
（2）Over the allowed time, no pedestrians are in the passageway.
Ø Self-recovery function: If the swing gates do not return to the hindering zero position because of human intervention, after revoking human intervention, the gate automatically will return to the hindering zero position.
Ø Automatic adjustment function: When the gate needs to be readjusted due to mechanical wear, the main control board can be used for automatic adjustment, which is precise and convenient.
Ø Memory function of passing requests: When more than 2 passing signals are given at the same time (including the same direction and opposite direction), the system will remember all the passing requests and finish them one by one. The number can be up to 255.
Ø Passing direction indicator:
（1）Direction indicator: The direction indicator is installed on the top of the housing to indicate the legal passing direction.
（2）Passing status indicator: It is installed inside the housing, indicating whether the swing gates can open after receiving the valid signal.
Ø Compatibility：Equipped with the dry contact signal input interface, RS485/RS232 interface, TCP/IP interface (optional), compatible with all kinds of access controllers.
l Security Design
Ø Self-check function when power on: The system will self-check routinely and alarm when the power is on, and intelligently detect the key hardware and function. Find the hidden danger within the shortest time!
Ø Open gate when power off: Adopted with the leading mechanical structure by original creation, the system will automatically unlock the swing gates when power off. The gates can be manually pushed to be open and convenient for evacuation, which meets the fire protection requirement.
Note: This function diagram is just for reference.
Ø Anti-clamping function:
Note: This function diagram is just for reference.
(1) Infrared anti-clamping: Install multi-pair of infrared sensors near the anti-clamping area where swing gate is moving. Once any person or object is detected within the anti-clamping area, the swing gate will automatically stop moving. The swing gate will not continue to move until the person or object leaves the anti-clamping area.
(2) Machinery anti-clamping: The swing gate will automatically stop moving when it encounters obstacles; the impulse force is within the safety range when the swing gate is moving.
(3) Electric current detection anti-clamping: If the gate encounters obstacles during its moving, and the system detects the abnormal current, the motor will stop or reversely move to prevent clamping pedestrian.
Ø Over-force feedback control function：When the gate is locked, it can support the impulse force within the safety range. If the impulse force is over the safety range, the gate can be manually pushed slowly so as to protect the mechanism and pedestrian, and then recovers automatically.
Ø Emergency escape function：Equipped with emergency escape control device, the system can automatically open the gate to evacuate pedestrians conveniently.
Ø Intelligent linkage alarm：Illegal traffic events can be linked with other alarm monitoring equipment: such as access control systems, video management systems.
Note: This function diagram is just for reference.
Keywords :
Email : contact@cmolo.com
Tel : 0086-0755-83065161
WhatsApp : +8615999546575
CMOLO Industrial Park,NO. 144-1, Hengping Road,Henggang Street, Longgang District, Shenzhen City, China
粤公网安备 44030702000602号
